Building on KRK’s legacy of sonic accuracy and performance, KRK CLASSIC 5 powered studio monitors incorporate over 30 years of innovation from the world’s leading studio monitor manufacturer. Borrowing concepts from previous ROKIT linessome of the most used studio monitors in the world, the CLASSIC 5 defaults to a flat frequency solution towards more critical listeningtranslating into more accurate mixes. With the optional ability to engage the +2 dB KRK Bass Boost, the CLASSIC 5 can also provide the enhanced bass response and sound that music creators around the world have loved for years.
The CLASSIC 5 is an active (self-powered) two-way studio monitor that utilizes a 1″ textile soft dome tweeter paired with a 5″ glass aramid woofer. The built-in power amplifiers provide a total of 50 watts of power, with a 30 watt amp driving the woofer, and a 20 watt amp for the tweeter.
The CLASSIC 5 Studio Monitor Pack includes two KRK CLASSIC 5 monitors, two 10 XLR-M to XLR-F cables, and two Split Foam Monitor Wedge Isolation Pads.
Features & Highlights
A pair of 50 watt, 5″ active studio monitor / Self-powered. Amps matched to drivers; no external amp hassles
Includes two KRK CLASSIC 5 monitors and two 10 XLR-M to XLR-F cables
Custom bi-amped, class A/B amplifiers / Provide high headroom and low distortion
Heavy-duty enclosure / Durable
Front-firing port / Allows placement flexibility (i.e. near walls) without interference from a rear-firing port
Dedicated low and high frequency level adjustment controls / Allows you to optimize the monitor’s response to better match the room acoustics and the user’s personal preferences
5″ glass aramid composite woofer / Rigid and lightweight driver for optimal sound quality
1″ textile soft dome tweeter / Smooth high frequency response with excellent HF extension to 34.5 kHz
Bass extension to 46 Hz / Excellent low frequency response for such a compact monitor
Universal connectivity with XLR, 1/4″ TRS, and RCA inputs / Interfaces with just about any mixer and/or audio interface
Volume control / Allows you to fine-tune your overall monitoring level
System-optimized auto-limiter / Prevents unexpected peaks from damaging the speakers and provides consistency and clarity at high volumes
2 foam isolation pads on bottom / Protects the surface the monitors are sitting on and provides isolation for improved clarity.
Specification:
101 dB Max Peak SPL
Configuration: 2-Way
System type: Active Studio Monitor
Low-Frequency Transducer: 5″ Glass Aramid Woofer
High-Frequency Transducer: 1″ Textile Soft Dome Tweeter
Frequency Response (+/- 3dB): 56Hz – 30kHz
Frequency Range (-10dB): 46Hz – 34.5kHz
Crossover Frequency: 2.6kHz
Average Beamwidth (Horizontal): 133 Degrees (900 Hz 9 kHz)
Average Beamwidth (Vertcal): 90 Degrees (900 Hz 9 kHz)
Max Peak SPL (With Limiter): 101 dB
Max Average SPL (With Limiter): 98 dB
Max Calculated SPL: 99 dB
Amplifiers: Class A-B
High Frequency Power Output (Watts): 20 Watts
Low Frequency Power Output (Watts): 30 Watts
Amplifier Distortion (THD+N): < 0.1% THD+N 20 Hz 20 kHz (-3 dB Max Power)
Input Impedance (Ohms): 10 K Balanced / 7 K Unbalanced
Input Sensitivity: 0 dBu Balanced / -15 dBV Unbalanced
SNR (Signal to Noise Ratio): > 94 dB
Controls: System Volume -30 dB – +6 dB
LF Level Adjust: (-1 dB, FLAT, +1 dB, +2 dB) Below 200 Hz
HF Level Adjust: (-2 dB, -1 dB, FLAT, +1 dB) Above 2.6 kHz
Indicators: Power
Input Connectors: RCA, Balanced 1/4″ TRS, Balanced XLR
Ouput Connectors: N/A
AC Fuse (Slow Blow / Time Lag): 120 VAC (T1AL, 250 V) 240 VAC (T500mAL,250 V)
Idle (Mute) AC Power Consumption: 14 Watts (NA SKU)
Maximum AC Power Consumption: 79 Watts (NA SKU)
Enclosure Construction: 15 mm MDF / High Impact Polystyrene
Finish: Black Vinyl Wrap
Grille: N/A
Hardware: Foam Isolation Pads
Product Dimensions (H x W x D): 9.68″ (246mm) x 7.40″ (188mm) x 11.20″(284mm)
Product Weight: 12.95 lb (5.87 kg)
Reviews
There are no reviews yet.